- January 10th, 2020, 7:43 pm
#6440
I am just getting into the trade and I have a job of installing a shower.
The client has already removed the tiles so the surface is very uneven, so I was intending to use some type of board to cover the area before retiring.
The choices I am looking at are:
- Hardie backer board
- Aquapanal
- Marmox
- Plaster board (moisture resistant)
Any advice on which one and the best way of mounting it to a solid brick (partly plastered) wall?
In addition. The area was a wet room. The floor tile have been taken up and the concrete surrounding the old trap has been dug out. Do I put the board on the walls first and then line up the new trap, fill the hold in the floor and then self level or is there another sequence?
The client has already removed the tiles so the surface is very uneven, so I was intending to use some type of board to cover the area before retiring.
The choices I am looking at are:
- Hardie backer board
- Aquapanal
- Marmox
- Plaster board (moisture resistant)
Any advice on which one and the best way of mounting it to a solid brick (partly plastered) wall?
In addition. The area was a wet room. The floor tile have been taken up and the concrete surrounding the old trap has been dug out. Do I put the board on the walls first and then line up the new trap, fill the hold in the floor and then self level or is there another sequence?
- By WilfordA