UK Plumber Forum 

A place of resource for Plumbers and Gas Engineers in the UK.

Ask your general plumbing questions here. Please have a quick check to make sure it wouldn't fit in any other category.
By plumb38
#8522
I have a Siemens thermostatic valve. Similar to this, but my valve is horizontal:

https://www.wolseley.co.uk/product/siem ... me-plated/

It used to have a very slow drip. Now it has started to increase.

AFAIK, the screw fitting to the rad is as tight as I can make it. The drip seems to be coming from the air holes in the valve. (Remember that the valve is horizontal.)

Question: Is it easy to unscrew the rotating part without needing to unscrew the whole valve from the rad?

If yes, how do I do that? And how do I fix the leak?

Thanks.
User avatar
By REDSAW
#8523
Hi, if you push down slightly on the plastic part toward the valve then locate and unscrew the chome ring beneath it it will come off.
there is a brass nut beneath that where it may be dripping from.
best result is to change whole valve as there only £7-20 each

Replacing leaking valve is preferred option but if[…]

Shower Pump

Volume of water out of pump can be no more than vo[…]

A coy way to ramp up the bill catching out those w[…]

Gravity or mains fed shower?

Thanks Redsaw but this is a pumped electric sh[…]