UK Plumber Forum 

A place of resource for Plumbers and Gas Engineers in the UK.

Put your Central Heating System question in here.
User avatar
By Croppie
#8045
How to Balance a Radiator Circuit

To begin, you need to gather some tools. Balancing radiators requires the following:

Radiator bleed key
Lockshield valve key
Screwdriver
Digital thermometer/multimeter with thermometer

Now that you have gathered these tools, it’s time to balance those radiators and uniform your home heating system performance. It’s a simple DIY job, yet so important you will no doubt feel like the absolute dobermans danglies when complete. Here’s how…

#1: Turn Off Your Heating
To begin balancing radiators, all of the radiators in your home must be completely cold. So, time to turn off your heating.
It also does help if you have recently bled them as your temperature readings will be more accurate.

#2: Working With Your Radiator Valves
You may already know the type of valve that your radiators possess. Perhaps you have planned it so that each of your radiators have the same type of valve. Perhaps not.
Either way, balancing your radiators involves having the correct lockshield valve access. This could be a push cap or a screw cap where the correct screwdriver needs to be used. Whatever it is, get that valve cap removed.

You should also look at the other side of the radiator to see whether you have a Thermostatic Radiator Valve – most modern radiators will do.

#3: Open Your Radiator Valves
Now that your radiator valves are exposed, it’s time to open them up. Radiator valves open in an anti-clockwise direction (turning to the left).
Depending on the condition of your radiator, it may be done quite simply by hand. If they are offering up a bit more resistance, grab your lockshield valve key and get twisting. Radiator balancing, here we come!

#4: Turn Your Heating On and Up
With all of your radiator valves now open, it’s time to crank up the heat. Turn back on your heating and make notes of the speed at which each of your radiators heat up.
It helps to enlist a few friends or the kids at this point so that you can shout to one another throughout the house as you document your radiators heating competition. Otherwise, you’ll be the one who’s heating up fastest as you rush between all of your homes radiators!
You’ll find those radiators nearest the boiler usually get hot the fastest. And by the end of this step, you will be left with a ranking of your radiators by which ones got hottest fastest.

#5: Turn Off Your Heating Again
Now you turn everything off and let your radiators cool down. Hey – I never said that balancing radiators was the most thrilling of tasks!
Many perform the first half of the operation one day then wait the night before performing the second half. It’s up to you how you do it – just be prepared for this time-consuming yet vital step.

#6: Fastest Rad First
The dust has settled, the paint on the walls has dried – now let’s turn the heating back on.
OK – let’s turn our attention to your fastest-heating radiator. My, what a well-performing beauty she is!
Let’s now close its lockshield valve in a clockwise direction (turn to the right) then, once closed, open it by exactly one quarter turn.

#7: Measuring The Temperature
With your fastest radiator nicely warm, it is time to take a couple of temperatures using your digital thermometer or multimeter with thermometer.
First, we take the temperature from the pipework next to the valve.
Next, we take the temperature from the pipework on the opposite side of the valve, where your Thermostatic Radiator Valve likely is.
Observe the difference, the gradually open the lockshield valve until the temperature difference between the two is 12°c precisely.
Do bear in mind that balancing radiators in this way requires some minutes between each lockshield adjustment for the temperature reading to respond accordingly.

#8: Onto The Rest of Your Radiators
Now that you have balanced your first radiator to an exact difference of 12°c, it is time to tend to your slightly slower radiators and balance them just the same. Do so in the order of their ranking.
So, close their lockshield valves and open once more by no more than a quarter turn. Open progressively, allowing some minutes for the radiator to catch up, until a 12°c difference is read.
What you will find when balancing radiators is that the amount the lockshield valve needs to be opened correlates to the distance of the radiator from your boiler.
When it comes to the slowest of your radiators – which may well be the furthest from your boiler – you may find the lockshield valve even needs to be opened completely.

#9: Balance is Restored
If you followed the above steps correctly you will find that your radiators are now balanced and that the dispersal of hot water from your boiler is reaching the furthest radiator from your boiler as evenly as it is reaching the closest.

What a result – now that is how you balance radiators! Now go and balance your inner Chi with a nice, cold beer!

Replacing leaking valve is preferred option but if[…]

Shower Pump

Volume of water out of pump can be no more than vo[…]

A coy way to ramp up the bill catching out those w[…]

Gravity or mains fed shower?

Thanks Redsaw but this is a pumped electric sh[…]