UK Plumber Forum

[JamesCranfield]

Hello,

Just bought a house, the valve on the 3/4" washing machine tee is leaking (capped for now). I don't want to replace the tee, I would just like to screw in a new valve section on to the end of the tee to bypass the broken valve. Struggling to find the right component - can anyone help point me in the right direction?

Cheers

[REDSAW]

Hello,

Just bought a house, the valve on the 3/4" washing machine tee is leaking (capped for now). I don't want to replace the tee, I would just like to screw in a new valve section on to the end of the tee to bypass the broken valve. Struggling to find the right component - can anyone help point me in the right direction?

Cheers

ER,nope!
ran it through my head several times and at least 6 scenarios of what parts may be involved came to mind.
A picture would narrow this down to about 60 seconds if you could provide one then may be able to tell you exactly.
stick a picture up and lets see!
cheers

[JamesCranfield]

Hi Redshaw,

Thanks for getting back to me.

IMG_02582.JPG (287.07KiB)Viewed 15540 times

Here's a picture of the valve that's leaking (the cold one). I don't want to replace the whole section if I can avoid it - I just want to screw a working valve onto the end of the existing thread. It's a standard washing machine inlet size 3/4". Any thoughts?

Cheers

[Best]

Just replace the entire valve. It should just be a straight swap.

[repaircare34]

A leaking 3/4" tee valve in your washing machine can cause water damage and affect the machine's performance. To fix this issue, first, turn off the water supply and unplug the washing machine. Locate the tee valve, which is typically found at the back of the machine, connecting the hot and cold water supply lines. Using adjustable pliers, carefully remove the hoses connected to the valve. Inspect the valve for any visible damage or debris. If the valve is faulty, replace it with a new one. Reconnect the hoses securely and turn on the water supply to check for leaks. If the issue persists, consider seeking professional assistance.

[joni os]

Replacing leaking valve is preferred option but if ends of pipe are embedded, allowing insufficient movement to remove the existing Tee then purchase :-
3/4 BSP female to 15 mm compression elbow. New washing machine valve, straight or bent . Will also need short length of 15 mm copper pipe and ptfe or loktite 55, to seal threads.

[pritchardsplumbing]

If the valve on your 3/4" washing machine tee is leaking, it's understandable that you'd want to bypass it rather than replacing the entire tee. To do that, you'll need to find a new valve section that you can screw onto the end of the tee. This valve section will essentially act as a replacement for the broken valve, allowing you to control the flow of water to your washing machine. When looking for the right component, you'll want to make sure it's compatible with your existing tee and fittings. You may need to measure the size and thread type of the tee to ensure a proper fit. Hardware stores or plumbing supply stores should have a variety of valve sections to choose from. Look for one that matches the size and specifications you need. If you're unsure, you can always ask a staff member for assistance. Once you've found the right component, simply screw it onto the end of the tee, and you should be good to go.