UK Plumber Forum 

A place of resource for Plumbers and Gas Engineers in the UK.

Ask your general plumbing questions here. Please have a quick check to make sure it wouldn't fit in any other category.
100 %
By Loccen
#8100
Good evening everyone, hope you are all well.

Just a little background info, I have very little knowledge in this area so forgive the possible stupid question.

I have a Lecico sink in my bathroom and the pop up plug has failed. I have tried to replace this with no real success. The issue is the "screw" part that joins with the actual plug. From what I have read, M16 seems to be the only size but it's too small. The opening where the thread needs to contact is a 20mm. Would anyone have any idea if there is a pop up plug in existence that would fit this? And if so what size?

I can't remove the actual waste pipe due to the sink being bolted to the wall and sealed which rests on the pedestal, which, conveniently, has a lip to prevent you from moving it out.

Many thanks in advance if anyone can help me.
Tim
By Loccen
#8104
Hello both, thank you for your quick replies!

Ok, I have added some pictures. I managed to get my hand with the phone behind the sink and took an extra picture here. I have no idea how they have managed to plumb the sink in and tighten that back part without having full access to it. Anyway, the main reason to have the pop plug is more for aesthetics rather than function. I also have to try and find a way to fix that nasty chip as well!

Many thanks,
Tim
Attachments
thumbnail_20200521_215944_001.jpg
thumbnail_20200521_215944_001.jpg (207.2 KiB) Viewed 516 times
thumbnail_20200521_215457.jpg
thumbnail_20200521_215457.jpg (116.72 KiB) Viewed 516 times
thumbnail_20200521_215350.jpg
thumbnail_20200521_215350.jpg (70.11 KiB) Viewed 516 times
thumbnail_20200521_215155.jpg
thumbnail_20200521_215155.jpg (71.11 KiB) Viewed 516 times
User avatar
By REDSAW
#8107
simple solution considering the damage and work required to replace...eventually just for brushing ones teeth!
why else does a basin need a plug?

https://www.toolstation.com/mcalpine-bl ... gKoV_D_BwE

If the explosion dont get you, the scalding water […]

Hello Peeps

should be in now swifty. How come all sappers/adi[…]

Shower Brand identification

Mr Swifty, that be an ideal standard Trevi blend a[…]

Kitchen Mixer Tap Nightmare

As Redsaw said. Multiply the hours you've cha[…]