UK Plumber Forum 

A place of resource for Plumbers and Gas Engineers in the UK.

Want to get squeaky clean but something's wrong? Go ahead and ask away in here.
100 %
User avatar
By REDSAW
#8496
Hi Tony,

should be ok if thats what you have. i done a few with speedfit but allways best to stick to triton instructions when you can using nut and olive.
The problem sometimes is the spiggott is not allways thet round in diameter IE: there could be over moldings to the joint. it might also be a little tight in the recess to fit speedfit. Also the plastic nylon might not allow enough 'bite' to stop the connector working loose.
otherwise-try it, i have the same shower.
Offset Cistern / Toilet Pan

yes your right, it may well cause flushing issues.[…]

Strange knocking noise

sounds like you have an open vented system. the no[…]

Air source heat pumps are a renewable alternative […]

Probably the shower is long since installed, but I[…]